Identification and Location
The emergency solenoid valve is mounted on the Fuel Control Unit.
System Design
It is a two position valve, which when positioned to automatic, directs fuel flow to the (automatic) metering valve. When the valve is positioned to emergency, it directs fuel to the emergency (manual) metering valve. After installing an Engine or Fuel Control Unit, during airframe intermediate inspections, or when a special verification of the proper operation of the AUTOMATIC/EMERGENCY system is required, perform an operational test of the system.
Disclaimer
*Basic Understanding and Best Practices – All Information & Documentation within is for Training and Guiding Purposes Only.
Any information should be cross checked with applicable OEM aircraft & maintenance Manuals.
** Any and All Training Information contained in official publications shall govern.
*** This guide may suggest and advise — BUT NOT DICTATE — Contents herein and are subject to change without prior notice. Please refer to official publication and current revisions.